Datasheet
Resources
- Spalling Concrete Repair & Preventive Solutions
- Spalling Concrete: Repair, Causes, and Prevention For Professionals
- ISO 12944
- Technical Datasheets
- Colour Selection
- Surface Preparation
- Application Guidelines
- Norsok M-501 Coating System Guide
Contact Us
- Our Location
- Enquiry Form
- Privacy Policy
- Terms & Conditions
- Colour Accuracy Statement
Indoacry 1060
Description
A single component, Rapid drying, modified alkyd-based finish. Specially designed to provide optimum performance, where a low sheen or matt
topcoat is needed.
Indoauto 4040
Description
This is a one component oxidatively drying modified alkyd topcoat. It has a glossy finish with good gloss
retention. To be used for areas of limited chemical exposure where a single pack finish coat is required.
Indoauto 4400G
Description
A single component, high solids, fast curing, modified alkyd based primer cum finish pigmented with zinc
phosphate to provide added anti corrosive performance and a decorative finish in a single coat.
Indokote IK 60 Etch Primer
Description
Indopoxy IK-60 is two component, Poly Vinyl resin based etch primer containing Anti Corrosion pigment Zinchrome and phosperic acid. It is designed to etch and passivate ferrous and non-ferrous metals. Indokote IK-60 Etch Primer offers excellent adhesion and barrier properties over Cold Galvanizing and other zinc coatings prior to topcoating with various paints and coatings.
Indofast 4025HT
Description
This is a one component fast air drying Hammer Tone finish. It has a glossy finish with good gloss retention. To be used in internal areas or in low to mild industrial environments.
Indofast 310 Z/C Redoxide Primer
Description
Single component Modified Alkyd based rust inhibitive, General Purpose uses primer pigmented with Zinchrome
and Natural Red Oxide as corrosion inhibiting pigment.
Indofast 330 Z/C Yellow and Z/Ph White Primers
Description
Indofast 330 is a Fast drying, Single component modified alkyd based anti corrosive “TRANSFORMER HEAT OIL
RESISTANCE” coating pigmented with Zinchromate as corrosion inhibiting pigment. The White version contains
Zinc Phosphate as Anti corrosion inhibitor. It protects internal surface of transformer tank from oil heat for
maximum 130°C temperature.
Indofast 375 Zinch Phosphate Primer Grey
Description
Indofast 375 is a fast drying primer containing zinc phosphate anti-corrosive pigmentation, designed for
application to all types of steel surfaces. This primer is characterised by good anti-corrosive properties, easy
application and the ability to protect hand cleaned steel.
Indoprotect 3000
Description
A single component, low solid, very fast curing, acrylated polymer based single coat finish. Black and other solid shades are pigmented with zinc phosphate to provide anti corrosive performance. This specialized coating is also
available in coloured transparent shades to provide a decorative finish in a single coat.
Indoprotect 4490
Description
A Single component acrylic modified polymers based air drying finish. Indoprotect 4490 cures very fast and is
suitable for structural steelwork/ equipments exposed to the environment where cosmetic appearance is
important, e.g. in dry internal areas or low corrosivity external environments.
Indoprotect 4900
Description
A single component, high solids, very fast curing, acrylic monomers modified special polymer based primer cum
finish pigmented with zinc phosphate to provide added anti corrosive performance and a decorative finish in a
single coat.
Indoprotect 490
Description
A fast drying, high performance universal anti corrosive primer in single component range of products,
pigmented with Zinc Phosphate as corrosion inhibiting pigment. It is an air Drying Primer, Red version contains natural Red Oxide.
Indoprotect 490 Z/C
Description
Single component Specialized polymer based anti corrosive primer pigmented with Zinc Chromate as corrosion inhibiting pigment. It is designed to use as wet on wet forced drying or as Air Drying Primer Coat. 490ZC is suitable for properly prepared carbon steel, aluminium and wooden substrates.
Indoprotect 490HOR
Description
490HOR is a Fast drying, Single component Acrylated polymer based anti corrosive “”TRANSFORMER HEAT OIL
RESISTANCE’ coating pigmented with Zinc Phosphate as corrosion inhibiting pigment. It protects internal surface of transformer tank from oil heat for maximum 140°C temperature.
Indoprotect 495
Description
A single component oxidatively fast drying, rust inhibitive primer, pigmented with Zinc Phosphate as corrosion inhibiting pigment.
Indoprotect 4900CS
Description
A single component, Semi Glossy, medium solids, very fast curing, special polymer based Casting Sealer pigmented with zinc phosphate to provide added anti corrosive performance and full cure to your casting surface in a single coat.
Indoprotect 4900F
Description
A single component, high solids, very fast curing, acrylic monomers modified special polymer based primer cum
finish pigmented with zinc phosphate to provide added anti corrosive performance and a decorative finish in a
single Flow coat.
Indoprotect 4490C
Description
A Single component acrylic modified polymers based air drying Clear Finish. Indoprotect 4490 cures very fast and is suitable for structural steelwork/ equipments exposed to the environment where cosmetic appearance is important, e.g. in dry internal areas or low corrosivity external environments.
Indoprotect 4490C HOR
Description
A Single component acrylic modified polymers based air drying Heat Resistance Clear Finish.
Indopoxy 233 HOR
Description
A Single component acrylic modified polymers based air drying Clear Finish. Indoprotect 4490 cures very fast and is suitable for structural steelwork/ equipments exposed to the environment where cosmetic appearance is important, e.g. in dry internal areas or low corrosivity external environments.
Indopoxy 240HB
Description
Indopoxy 240HB is a medium solid, high build two component anti corrosive epoxy primer. It contains high amount of Zinc Phosphate as corrosion inhibiting pigment for protection in extreme environments.
Indopoxy 250
Description
Indopoxy 250 is a Two component Amine cured anti corrosive primer containing Zinc Phosphate and natural Red Oxide as corrosion inhibiting pigments.
Indokote 250SIL
Description
Indokote SIL250 is single component, silicone acrylic resin based high temperature aluminum coating. SIL250 is designed to provide heat resistant up to 250 °C. It can be used as primer, mid coat or finish coat in atmospheric environments. It is suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
Indopoxy 270 WOW
Description
Indopoxy 270 Versatile Epoxy Primer is a medium solid slow drying 2K wet on wet Epoxy Primer. It has excellent adhesion as well as corrosion resistance. This product is also suitable for sanding process. Gives good resistance to chemicals & moisture. It is most suitable for High productivit
Indopoxy271 WOW
Description
Nippopoxy 271 Primer is a medium solid slow drying 2K wet on wet Epoxy Primer. It has excellent adhesion as well as corrosion resistance. This product is also suitable for the sanding process. Gives good resistance to chemicals & moisture. It is most suitable for High productivity.
Nippopoxy320HS W/S
Description
Nippopoxy 320HS is a Two component amine cured fast drying anti corrosive general industrial primer. It can be use for Wet On
Wet, Sanding, and Non Sanding.
Indopoxy 320
Description
Indopoxy 320 is a Two component amine cured fast drying anti corrosive general industrial primer containing Zinc Phosphate as corrosion inhibiting pigments.
Indopoxy 630
Description
Indopoxy 630 is a Two component Polyamine cured anti corrosive high performance medium solid coating containing Zinc Phosphate as corrosion inhibiting pigments.
Indopoxy 630HB
Description
Indopoxy 630HB is a Two component Polymide cured anti corrosive high performance primer containing Zinc Phosphate as corrosion inhibiting pigments.
Nippopoxy 260
Description
Nippopoxy 260 is a Two-component polyamide-cured fast-drying primer. It has excellent adhesion as well as corrosive resistance
general industrial primer.
Indopoxy 645
Description
Indopoy 645 is a Two component EPOXY based polyamide cured highly Corrosion Protective Intermediate coat, pigmented with Micaceous Iron Oxide. It provides a tough coating with long term protection. It has excellent barrier protection, fast curing and long overcoating properties.
Indopoxy 645MIO
Description
Indopoxy 645MIO is a two component, high solid, high build Intermediate coating, pigmented with Micaceous Iron Oxide. It has excellent
barrier protection, fast curing and long overcoating properties.
Nippopxy 680HS MIO
Description
Nippoxy 680 HSMIO is a two-pack, high solids, High buildepoxy intermediate coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.
Nippopoxy 675HSF MIO
Description
Nippopoxy 672HS F ZP Primer is a two-pack, high-solid primer and intermediate coating pigmented with Zinc Phosphate. It gives excellent adhesion, surface-wetting properties, and anti-corrosive protection.
Nippopoxy 670 MIO
Description
Two component highly Corrosion Protective (Polymide cured) coating, pigmented with Zinc Phosphate and Micaceous Iron Oxide. It provides a tough coating with long term protection. It has excellent adhesion and moisture barrier action for steel structures especially exposed to marine conditions.
Indopoxy 690HSHB
Description
Two component EPOXY based Surface Tolerant (Polyamine cured) coating pigmented with specialized Anti Corrosion Pigments. It provides a tough coating with long term protection on manually cleaned steel or concrete surfaces and can be used as maintenance coatings in high build system.
Nippopoxy 692HSHB
Description
Nippopoxy 692 HSHB Mastic is a two-pack, surface-tolerant, high solids epoxy masticcoating. It is an anti-corrosive primer and/or
intermediate coating for corrosion protection of steel and other substrates in atmospheric environments.
Indopoxy 690UHS
Description
Two component Surface Tolerant (Polyamine cured) coating pigmented with aluminium to provide better barrier protection. It’s a high solids, abrasion resistant coating, which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.
Indopoxy 690ST
Description
690 is a Two-component polyamide-cured fast-drying Surface tolrent primer. It has excellent adhesion as well as corrosive resistance
general industrial primer.
Indopoxy 700ZR
Description
700ZR is two component polyamide cured high zinc contains, zinc rich epoxy primer. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments.
Indopoxy 740ZR
Description
40ZR is a two component polyamide cured high build zinc rich epoxy primer. It provides very good corrosion protection as part of anti-corrosion coating system. It provides a tough coating with long term protection. It has excellent barrier action for steel structures especially exposed to high corrosive environments.
Nippopoxy 760F ZR
Description
Nippopoxy 760 ZR Primer is a two-pack, fast dry, zinc-rich epoxy Flow primer. It is recommended where high level of corrosion resistance is
required. It gives excellent corrosion resistance properties and ability to perform against the severe chemical environment.
Nippopoxy760 ZR
Description
Nippopoxy 760 ZR Primer is a two-pack, fast dry, zinc-rich epoxy primer. It is recommended where high level of corrosion resistance is
required. It gives excellent corrosion resistance properties and ability to perform against the severe chemical environment.
Nippopoxy 710ZR
Description
Nippopoxy 710ZR is a two component high solid, metallic zinc rich epoxy primer to provide excellent
corrosion resistance as single coat or as high performance coating system. It contains 85% zinc in dry film by
weight. Highly suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel
substrates.
Nippopoxy 790ZR
Description
Nippopoxy 790 ZR Primer is a two-pack, fast-dry, zinc-rich epoxy primer. It is recommended where a high level of corrosion resistance
is required. It gives excellent corrosion resistance properties and the ability to perform against the severe chemical environment. It
contains 90% of Zinc Content on dry film.
Nippopoxy 755ZR
Description
755ZR is a two component polyamide cured high build zinc rich epoxy primer. It provides very good corrosion protection as part of
anti-corrosion coating system. It provides a tough coating with long term protection. It has excellent barrier action for steel structures especially exposed to high corrosive environments.
Valuethane EP ZR
Description
It is a two-component polyamide cured high build zinc rich epoxy primer. It provides very good corrosion protection as part of an anti-corrosion coating system. It provides a tough coating with long-term protection. It has excellent barrier action for steel structures especially when exposed to highly corrosive environments.
Indopoxy 900CT
Description
Epoxy High Solid Coal Tar Coating is two component EPOXY based Highly Corrosion Protective (Polymide cured) coating to provide corrosion protection for steel and concrete surfaces exposed to water immersion or chemical splash, spillage and fumes. It is a Self priming coating on most surfaces.
Nippopoxy 672HSF Z/Ph
Description
Nippopoxy 672HS F ZP Primer is a two-pack, high-solid primer and intermediate coating pigmented with Zinc Phosphate. It gives excellent adhesion, surfacewetting properties, and anti-corrosive protection.
Nippopoxy660 ZP
Description
Nippopoxy 660 ZP Primer is a two-pack, high solids, High buildepoxy intermediate coating pigmented with micaceous iron oxide. It
provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.
Nippopoxy 361 Tank
Description
Nippopoxy 361 Tank lineris a two-pack epoxy novolack coating exhibit resistance in wide range of chemicals. It gives three dimension
network structures with
Indopoxy 4100SG
Description
Wo-component EPOXY based High Solid and chemical resistance Direct-to-Metal Finish. Indopoxy 4100SG DTM contains specialized Anti
Corrosion Pigments. It provides a tough coating with long-term protection and it has excellent performance when exposed to moderate
corrosive/industrial environments.
Indopoxy 5070
Description
Two component EPOXY based Polymide cured chemical resistance Top coating. This product exhibits good abrasion resistance and good protection agianst spills or spilage of range of corrosive chemicals, solvents, Acids and Alkalis, renders durable finish in industrial and marine environment.
Indopoxy 5070HB
Description
Two component EPOXY based Polymide cured chemical resistance, high build, high performance intermediate or finish with excellent chemical and abrasion resistance.
Indopoxy 5080HS
Description
A high solid, high build, high performance, two component epoxy finish with excellent chemical and abrasion resistance. This product has excellent performance when exposed to chemical/ industrial environment.
Indopoxy 5100
Description
Two component EPOXY based High Solid Fast Curing chemical resistance Direct-to-Metal Finish. Indopoxy 5100 contains Zinc Phsophate as Anti Corrosive Pigment and has excellent performance when exposed to moderate corrosive/ industrial environment.
Indopoxy 5100F
Description
Two component EPOXY based High Solid Fast Curing chemical resistance Direct-to-Metal Flow Finish. Indopoxy 5100 contains Zinc Phsophate as Anti Corrosive Pigment and has excellent performance when exposed to moderate corrosive/ industrial environment.
Valuethane EP DT
Description
Two-component EPOXY based Medium Solid moderate Curing chemical resistance Direct-to-Metal Finish. Valuthane EPDT contains
specialized Anti Corrosion Pigments. It provides a tough coating with long-term protection and it has excellent performance when exposed to
moderate corrosive/industrial environments.
Valuethane EP DT HS
Description
Two-component EPOXY based High Solid Fast Curing chemical resistance Direct-to-Metal Finish. Valuthane EPDT HS contains specialized
Anti Corrosion Pigments. It provides a tough coating with long-term protection and it has excellent performance when exposed to moderate
corrosive/industrial environments.
Indothane 4800G
Description
Two-component aliphatic isocyanate cured Glossy, Fast Cured, DTM (Direct-to-Metal) polyurethane finish. Nippothane 4800G is
pigmented with zinc phosphate to provide anti-corrosive properties.
Indothane 1033
Description
Two component Acrylic Polyurethane based, Aliphatic Isocyanate cured High Performance, medium Solid finish to provide excellent
Gloss and Colour retention. To be used as topcoat in atmospheric environments.
Indothane 1067HS
Description
1067HS topcoat is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Indothane 1070
Description
Two component Acrylic Polyurethane based, Aliphatic Isocyanate cured High Performance, Medium Solid finish to provide excellent
Gloss and Gloss retention.1070 is highly recommended finish coat in chemical highly corrosive industrial environments.
Indothane 1070C
Description
Two component Acrylic Polyurethane based, Aliphatic Isocyanate cured High Performance, Clear finish to provide excellent Gloss and Gloss retention. 1070C is highly recommended finish coat in chemical highly corrosive industrial environments.
Nippothane1066F
Description
Nippothane 1066F is a two-pack, high-gloss aliphatic acrylic polyurethane finish Flowcoat. It provides high durability, excellent gloss, and color retention.
It also offers good abrasion, chemical, and impact resistance when applied over proven systems.
Nippothane1066HS
Description
Nippothane 1066 HS is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss
and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems
Indothane 2075
Description
2075 topcoat is a two-pack, high-gloss aliphatic acrylicpolyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Nippothane2075HSSG
Description
Two-component aliphatic Isocyanate cured high solid, Semi-Glossy, DTM (Direct-to-Metal) acrylic polyurethane primer cum finish coating, pigmented with zinc phosphate to provide anti-corrosive properties.
Indothane 4080
Description
Two-component Polyurethane based, Aliphatic Hardener cured PU finish for Top coatings.4080 is recommended for Heavy machinery and equipment for excellent weather protection.
Nippothane4080HB
Description
Two-component Polyurethane based, Aliphatic Hardener cured PU finish for Top coatings. Nippothane 4080
HB is recommended for, Logistics Containers, Heavy machinery and equipment for excellent weather protection.
Nippothane4180
Description
Two-component Polyurethane based, Aliphatic Hardener cured PU DTM finish for Top coatings. Nippothane 4080
HB is recommended for, Agriculture, Heavy machinery and equipment for excellent weather protection.
Indothane4090X
Description
Two component air drying Polyurethane finish for General Industrial applications.
Indothane 990
Description
Two component Acrylic Polyurethane based anti corrosive primer containing Zinc Phosphate ascorrosion inhibiting pigment. Indothane 990 is an ideal chioce as primer in Automotive Refinish System and High Quality Wood Finish.
Indothane 280
Description
Indothane 280 is a Two component isocynate cured fast drying anti corrosive general industrial primer containing Zinc Phosphate as corrosion inhibiting pigments.
Valuethane PU
Description
Valuethane PU is a polyester urethane 2K System which provides a high film build combined with excellent hiding.
It is designed to have an outstanding durability and chemical resistance in economy range
Thinner IK 1701
Description
PU Fast drying Thinner,Use with PU Paint.
Thinner IK 1701SD
Description
PU Slow drying Thinner, Use with PU Paint.
Thinner IK 1702
Description
Pu Universal thinner, Use for Cleaning, use wiht Pu & Epoxy Paint
Thinner IK 1708
Description
Pu Premium thinner, Use in PU Paint.
Thinner IK 1706
Description
Cleaning Thinner, Use for Cleaning of Spray Gun, Pipeline.
Thinner IK 1705
Description
Pu Premium thinner, use in Pu Paints.
Thinner IK 708
Description
Screen Printing thinner.
Thinner IK 1501
Description
Epoxy Thinner, Use in Epoxy Coatings.
Thinner IK 900
Description
Autofinish Fast drying thinner, Use in Acrylated Paints.
Thinner IK 707
Description
Autofinish Fast drying thinner, Use in Acrylated Paints.
Indothane PU Retarder
Description
Slow Drying PU Tinner, Use for reduction of Paint drying.
1
/
1